{{flagHref}}
| 카탈로그 번호. | NB4866 |
| 등급 | Cb-752 |
| 모양 | 시트 |
| 두께 | 0.5-3.0(mm) |
| 너비 | 30-600(mm) |
| 길이 | 30-2000(mm) |
Niobium Cb-752 Alloy Sheet는 고온에서 높은 강도와 실온에서 좋은 연성을 가지고 있습니다. Stanford Advanced Materials (SAM)는 고품질 Niobium Cb-752 Alloy Sheet의 제조 및 공급에 대한 풍부한 경험을 가지고 있습니다.
관련 제품: Niobium C-103 Alloy Rods/Ingots, Niobium Hafnium Alloy Foil, Niobium Nickel Alloy Foil
니오븀 Cb-752 합금 시트는 고온에서 강도가 높고 상온에서 가소성이 우수합니다. 일반적인 가공 기술로 다양한 소재와 부품으로 만들 수 있습니다.
|
밀도 |
9.03 g/cm³ |
|
융점 ℃ |
2425 |
|
비열 |
0.281 J/g-℃ |
|
인장 강도 |
540 MPa(궁극) / 400 MPa(항복) |
|
열 전도성 |
48.7 W/m-K |
|
열 팽창 |
7.40 µm/m-℃ |
니오븀 Cb-752 합금 시트는 주로 우주 왕복선 스킨, 원자로 엔지니어링 및 제트 엔진 부품에 사용됩니다.
당사의 니오븀 Cb-752 합금 시트는 제품의 품질을 원래 상태로 유지하기 위해 보관 및 운송 중에 신중하게 취급됩니다.
Q1: Cb-752의 구성은 무엇입니까?
A1: 니오븀 기반 합금으로 텅스텐(W) 약 10와트%와 지르코늄(Zr) 2.5와트%가 함유되어 있으며 미량의 불순물이 포함되어 있습니다.
Q2: 일반적인 외관과 사용 가능한 형태는 무엇인가요?
A2: 합금 시트는 금속 내화성 소재입니다. 표준 및 맞춤형 구성으로 제공되며 시트, 로드, 와이어, 바, 튜브 및 스퍼터링 타겟으로 공급됩니다.
Q3: 주요 용도는 무엇인가요?
A3: 고온 구조용 소재로 사용됩니다. 주요 응용 분야로는 항공우주 부품, 원자로 엔지니어링, 제트 엔진 부품, 열방사선 차폐, 우주선 스킨 섹션 등이 있습니다.
|
밀도 |
9.03 g/cm³ |
|
녹는점 ℃ |
2425 |
|
비열 |
0.281 J/g-℃ |
|
인장 강도 |
540 MPa(궁극) / 400 MPa(항복) |
|
열 전도성 |
48.7 W/m-K |
|
열 팽창 |
7.40 µm/m-℃ |
*위 제품 정보는 이론적인 데이터를 기반으로 하며 참고용입니다. 실제 사양은 다를 수 있습니다.
Product Name: Niobium Cb-752 Alloy
CAS #:
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture in accordance with 29 CFR 1910 (OSHA HCS)
GHS02 Flame
Flam. Sol. 1 H228 Flammable solid.
Hazards not otherwise classified
No data available
GHS label elements
GHS label elements, including precautionary statements
Hazard pictograms
GHS02
Signal word
Danger
Hazard statements
H228 Flammable solid.
Precautionary statements
P210
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P280Wear protective gloves/protective
clothing/eye protection/face protection.
P240
Ground/bond container and receiving equipment.
P241
Use explosion-proof electrical/ventilating/lighting/equipment.
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
WHMIS classification
B4 - Flammable solid
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 1
Flammability = 3
Physical Hazard = 1
Other hazards
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Substances
CAS No. / Substance Name:
7440-03-1 Niobium
Identification number(s):
EC number: 231-113-5
7440-58-6 Hafnium powder
Identification number(s):
EC number: 231-166-4
7440-32-6 Titanium
Identification number(s):
EC number: 231-142-3
Description of first aid measures
If inhaled:
Supply patient with fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
If swallowed:
Seek medical treatment.Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing agents
Water
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Niobium oxide
Advice for firefighters
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
Environmental precautions:
Do not allow product to enter drains, sewage systems, or other water courses.
Methods and materials for containment and cleanup:
Ensure adequate ventilation.
Prevention of secondary hazards:
Keep away from ignition sources.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
Store in a cool location.Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average
face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
None.
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Maintain an ergonomically appropriate working environment.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Recommended filter device for short term use:
Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls.
Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only
use equipment tested and approved under appropriate government standards.
Protection of hands:
Impervious gloves
Inspect gloves prior to use.
Suitability of gloves should be determined both by material and quality, the latter of which may vary by
manufacturer.
Material of gloves
Nitrile rubber, NBR
Penetration time of glove material (in minutes)
480
Glove thickness
0.11 mm
Eye protection:
Safety glasses
Body protection:
Protective work clothing
Information on basic physical and chemical properties
Appearance:Form: Powder
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: No data available.
Boiling point/Boiling range: No data available.
Sublimation temperature / start: No data available
Flammability (solid, gas)
Highly flammable.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Relative density
No data available.
Vapor density
N/A
Evaporation rate
N/A
Solubility in Water (H
2
O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidizing agents
Conditions to avoid
No data available
Incompatible materials:
Oxidizing agents
Hazardous decomposition products:
Niobium oxide
Information on toxicological effectsAcute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for this
substance.
LD/LC50 values that are relevant for classification:
No data
Skin irritation or corrosion:
May cause irritation
Eye irritation or corrosion:
May cause irritation
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
No effects known.
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC,
NTP, OSHA or ACGIH.
Reproductive toxicity:
No effects known.
Specific target organ system toxicity - repeated exposure:
No effects known.
Specific target organ system toxicity - single exposure:
No effects known.
Aspiration hazard:
No effects known.
Subacute to chronic toxicity:
No effects known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Other adverse effects
No data available
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, IMDG, IATA
UN3089
UN proper shipping name
DOT
Metal powders, flammable, n.o.s.
IMDG, IATA
METAL POWDER, FLAMMABLE, N.O.S.
Transport hazard class(es)
DOT
Class
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Label
4.1
Class
4.1 (F3) Flammable solids, self-reactive substances and solid desensitised explosives
Label
4.1
IMDG, IATA
Class
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Label
4.1
Packing group
DOT, IMDG, IATA
II
Environmental hazards:
N/A
Special precautions for user
Warning: Flammable solids, self-reactive substances and solid desensitised explosives
EMS Number: F-G,S-G
Segregation groups
Heavy metals and their salts (including their organometallic compounds), powdered metals
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
UN "Model Regulation":
UN3089, Metal powders, flammable, n.o.s., 4.1, Il
Safety, health and environmental regulations/legislation specific for the substance or mixture
GHS GHS label elements, including precautionary statements
Hazard pictograms
GHS02
Signal word
Danger
Hazard statements
H228 Flammable solid.
Precautionary statements
P210
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P280
Wear protective gloves/protective clothing/eye protection/face protection.
P240
Ground/bond container and receiving equipment.
P241
Use explosion-proof electrical/ventilating/lighting/equipment.
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information isbelieved to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
| 카탈로그 번호 | 등급 | 치수 |
|---|---|---|
| NB7804 | Nb-752 | 1mm 두께 |
| NB7805 | Nb-752 | 2mm 두께 |
| NB7806 | Nb-752 | 3mm 두께 |
| NB7807 | Nb-752 | 4mm 두께 |
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.