{{flagHref}}
| 카탈로그 번호. | PT4589 |
| 재료 | Pt/Ir 90/10 |
| 외경 | 0.2~8 mm |
| 벽 두께 | 0.015~0.5mm |
| 녹는점 | 1800 ℃ |
| 양식 | 마커 밴드 |
| 동의어 | 백금 이리듐 마커 밴드, Pt-10Ir 마커 밴드 |
첨단 소재 연구 및 생산 전문 기업인Stanford Advanced Materials는 세심한 장인 정신과 엄격한 품질 관리를 통해 각 제품이 국제 최고의 표준에 도달하도록 보장합니다. 백금 이리듐 마커 밴드(Pt/10 Ir) 는 백금 90%와 이리듐 10% 합금으로 만든 방사성 불투명 의료 부품으로, X-선 아래에서 뛰어난 가시성, 생체 적합성 및 기계적 안정성으로 인해 카테터 기반 시술에 일반적으로 사용됩니다.
관련 제품 탄탈륨 마커 밴드(Ta 마커 밴드), 백금 이리듐 와이어
플래티넘 이리듐 마커 밴드 (Pt/10 Ir)는 최소 침습 수술을 포함한 의료 기기 산업에서 사용됩니다. 혈관 성형술 및 기타 최소 침습 카테터 절차 동안 방사선 불투과성 마커에 적합합니다. 플래티넘-이리듐 합금은 가장 안정적인 화학적, 기계적, 전기적 특성을 가진 합금 중 하나입니다. 높은 강도, 높은 탄성, 낮은 접촉 저항, 우수한 생체 적합성을 특징으로 하며, 이식 및 사용 개입 수술을 위한 이상적인 재료입니다. 마커 밴드는 중재 치료의 최종 작업 영역에서 X-레이 개발 마크로 사용되는 일회용 의료 자재의 일종인 마킹 링입니다.
SAM은 현재 최소 0.2mm에서 최대 8.0mm의 외경을 가진 마커 밴드를 제조할 수 있습니다. 정확도 및 외경 크기는 고객 요구 사항에 맞게 맞춤 제작할 수 있습니다.
|
재료 |
Pt/Ir 90/10 |
|
외경 |
0.2~8 mm |
|
벽 두께 |
0.015~0.5 mm |
|
융점 (℃) |
1800 |
|
표준 |
ASTM F560 |
|
밀도 |
21.53 g/cm3 |
저희 플래티넘 이리듐 마커 밴드 (Pt/10 Ir)는 제품의 품질을 원래 상태로 유지하기 위해 저장 및 운송 과정에서 세심하게 처리됩니다.
Q1: 붕소 나이트라이드 세라믹 (BNSIO)란 무엇입니까?
붕소 나이트라이드 세라믹 (BNSIO)은 붕소 나이트라이드 (BN)로 구성된 고성능 세라믹 재료로, 열전도율, 기계적 강도 및 전기 절연성을 향상시키기 위해 추가 성분이 포함되어 있습니다. 특정 응용 분야에 따라 헥사곤 붕소 나이트라이드 (h-BN), 입방 붕소 나이트라이드 (c-BN) 및 기타 변형이 있습니다.
Q2: 붕소 나이트라이드 세라믹 (BNSIO)의 주요 속성은 무엇입니까?
고온 안정성: 붕소 나이트라이드 세라믹 (BNSIO)은 고온 조건에서 매우 안정적이며, 일반적으로 1000℃ 이상의 온도에서도 분해되지 않고 견딜 수 있습니다.
전기 절연성: 붕소 나이트라이드 세라믹 (BNSIO)은 우수한 전기 절연 특성을 제공하여 전자 및 전기 응용 분야에 적합합니다.
열 전도율: 붕소 나이트라이드 세라믹 (BNSIO)은 우수한 열 전도성을 가지고 있어 장치 및 구성 요소에서 효율적인 열 방출이 가능합니다.
화학 불활성: 붕소 나이트라이드 세라믹 (BNSIO)은 화학적으로 안정적이며 산화에 저항하며, 심한 환경에서도 대부분의 화학 물질과 반응하지 않습니다.
Q3: 붕소 나이트라이드 세라믹 (BNSIO)의 최대 작동 온도는 무엇입니까?
붕소 나이트라이드 세라믹 (BNSIO)은 일반적으로 1000℃에서 1300℃ (1832℉에서 2372℉)까지의 온도를 견딜 수 있으며, 특정 등급 및 조성에 따라 다릅니다. 이러한 고온에서도 안정성을 유지하는 능력 덕분에 가열로, 반응기 및 항공 우주 구성 요소와 같은 고온 환경에 적합합니다.
|
재료 |
Pt/Ir 90/10 |
|
외경 |
0.2~8 mm |
|
벽 두께 |
0.015~0.5 mm |
|
녹는점 (℃) |
1800 |
|
표준 |
ASTM F560 |
|
밀도 |
21.53 g/cm3 |
*위 제품 정보는 이론적인 데이터를 기반으로 하며 참고용입니다. 실제 사양은 다를 수 있습니다.
Product Name: Platinum Iridium Marker Bands
CAS #: 37186-87-1
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The substance is not classified as hazardous to health or the environment according to the CLP
regulation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
N/A
Information concerning particular hazards for human and environment:
No data available
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No 1272/2008
N/A
Hazard pictograms
N/A
Signal word
N/A
Hazard statements
N/A
WHMIS classificationNot controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 0
Flammability = 0
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Substances
CAS No. / Substance Name:
Platinum, Iridium Foil
Identification number(s):
EC number:
2311161
Description of first aid measures
General information
No special measures required.
If inhaled:
Seek medical treatment in case of complaints.
In case of skin contact:
Generally the product does not irritate the skin.
In case of eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If swallowed:
If symptoms persist consult doctor.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Product is not flammable. Use fire-fighting measures that suit the surrounding fire.
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Advice for firefightersProtective equipment:
No special measures required.
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Pick up mechanically.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Information about protection against explosions and fires:
No special measures required.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Not required.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
No further data; see section 7.
Control parameters
Components with limit values that require monitoring at the workplace:
Platinum metal and soluble salts (as Pt)
mg/m3
ACGIH TLV 1 (metal); 0.002 (soluble salts)
Austria MAK 1 (metal); 0.002 (soluble salts)
Belgium TWA 1 (metal); 0.002 (soluble salts)Denmark TWA 0.002 (soluble salts)
Finland TWA 1 (metal); 0.002 (soluble salts)
France VME 1 (metal)
Germany MAK 0.002 (soluble salts)-Ceiling
Hungary TWA 0.001; 0.002-STEL (soluble salts)
Korea TLV 1 (metal); 0.002 (soluble salts)
Netherlands MAC-TTG 1 (metal); 0.002 (soluble salts)
Norway TWA 0.002
Switzerland MAK-W 0.002
United Kingdom TWA 5 (metal); 0.002 (soluble salts)
USA PEL 0.002
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Maintain an ergonomically appropriate working environment.
Breathing equipment:
Not required.
Protection of hands:
Not required.
Eye protection:
Safety glasses
Body protection:
Protective work clothing
Information on basic physical and chemical properties
Appearance:
Form: Solid in various forms
Color: Silver grey
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: 1780-1800 °C (3236-3272 °F)
Boiling point/Boiling range: No data available
Sublimation temperature / start: No data available
Flash point: N/A
Flammability (solid, gas)
Product is not flammable.
Fine powder: flammable
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 21.56 g/cm
3
(179.918 lbs/gal)
Relative density
No data available.Vapor density
N/A
Evaporation rate
N/A
Solubility in Water (H
2
O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
No dangerous reactions known
Conditions to avoid
No data available
Incompatible materials:
Oxidizing agents
Hazardous decomposition products:
None known.
Information on toxicological effects
Acute toxicity:
No effects known.
LD/LC50 values that are relevant for classification:
No data
Skin irritation or corrosion:
Powder: irritant effect
Eye irritation or corrosion:
Powder: irritant effect
Sensitization:
Platinum salts, especially ionic platinum halogeno complexes, may cause severe allergic reactions.
Germ cell mutagenicity:
No effects known.
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC,
NTP, OSHA or ACGIH.
The Registry of Toxic Effects of Chemical Substances (RTECS) contains tumorigenic and/or
carcinogenic and/or neoplastic data for this substance.
Reproductive toxicity:
No effects known.Specific target organ system toxicity - repeated exposure:
No effects known.
Specific target organ system toxicity - single exposure:
No effects known.
Aspiration hazard:
No effects known.
Other information (about experimental toxicology):
Tumorigenic effects have been observed on tests with laboratory animals.
Subacute to chronic toxicity:
Exposure to iridium compounds may cause irritation to the eyes or respiratory tract. To
xicity of iridium is not known. It is predicted to have toxicity similar to osmium
and platinum, two members of the same group.
Exposure to platinum containing dusts or fumes may cause irritation, sensitization reactions
and asthma. Effects include sneezing, coughing, tightness in the chest, dyspnea and wheezing.
Cyanosis is possible. Chronic exposure may result in pulmonary fibrosis.
Subacute to chronic toxicity:
No effects known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow material to be released to the environment without official permits.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Other adverse effects
No data available
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
Not a hazardous material for transportation.
UN-Number
DOT, IMDG, IATA
None
UN proper shipping name
DOT, IMDG, IATA
None
Transport hazard class(es)
DOT, ADR, IMDG, IATA
Class
None
Packing group
DOT, IMDG, IATA
None
Environmental hazards:
N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
Not dangerous according to the above specifications.
DOT
Marine Pollutant (DOT):
No
Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH - Pre-registered substances
Substance is not listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
| 카탈로그 번호 | 등급 | 치수 |
|---|---|---|
| PT8176 | Pt10Ir | OD0.35*ID0.30*L0.50 mm |
| PT8177 | Pt10Ir | OD0.40*ID0.35*L0.80 mm |
| PT8178 | Pt10Ir | OD0.60*ID0.36*L0.35mm |
| PT8179 | Pt10Ir | OD0.80*ID0.60*L0.50 mm |
| PT8180 | Pt10Ir | OD0.90*ID0.80*L1.95 mm |
| PT8181 | Pt10Ir | OD1.50*ID0.60*L0.25 mm |
| PT8182 | Pt10Ir | OD2.50*ID2.40*L1.20 mm |
| PT8183 | Pt10Ir | OD5.40*ID5.30*L2.50 mm |
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.