{{flagHref}}
카탈로그 번호. | SC3998 |
재료 | 질화 규소 |
순도 | 95%-99% |
밀도 | 3.22g/cm3 |
치수 | 사용자 지정 |
질화 실리콘은 금속 산업에서 일반적으로 사용되는 세라믹 재료입니다. Stanford Advanced Materials (SAM)는 질화 실리콘 제품의 전문 제조업체입니다. 고객의 요구 사항에 따라 맞춤형 가공 질화 실리콘 제품을 제공합니다. 제품은 국내 전역에서 판매되며, 독일, 스페인, 일본 및 한국으로 수출됩니다. 또한, 엄격한 관리 및 첨단 생산 기술을 보유하고 있습니다. 맞춤형 제품에 대해서는 언제든지 문의해 주시기 바랍니다.
실리콘 나이트라이드는 기술 세라믹 분야에서 다재다능한 재료입니다. 강도와 파손 인성이 뛰어나고, 열충격 저항성과 뛰어난 마모 및 충격 저항성이 있어 다양한 응용 분야에 적합합니다. 낮은 밀도와 높은 강도가 결합되어 경량 구조의 최적 구현이 가능합니다.
실리콘 나이트라이드 세라믹은 소결 시 수축하지 않는 무기 세라믹 재료입니다. 실리콘 나이트라이드를 생산하는 방법은 SRBSN, GPSN, HPSN, HIP-SN 및 RBSN의 다섯 가지가 있으며, 적용 및 작업 재료의 차이가 있습니다.
항목 |
단위 |
일반값 |
밀도 |
g/cm3 |
3.22 |
물리적 특성 |
||
경도 |
- |
HRA90 |
비커스 경도 (Hv50) |
HV0.5 |
>1550 |
탄성 계수 |
Gpa |
290 |
굽힘 강도 |
MPa |
>600 |
압축 강도 |
MPa |
2500 |
파괴 인성, KIc |
MPa•m1/2 |
>6.0 |
열역학적 특성 |
||
최대 사용 온도 |
ºC |
1200 |
열전도율 |
W/m•k |
15-20 |
열팽창 계수 |
10-6/ ºC |
>3.1 |
열충격 저항성 |
ΔT ºC |
500 |
비열 용적 |
KJ/kg.k |
700 |
전기적 특성 |
||
20 ºC에서의 부피 저항 |
Ω•cm |
1.0x1012 |
-온도 범위에 걸쳐 높은 강도
-높은 파괴 인성
-높은 경도
-우수한 마모 저항성
-낮은 열팽창률과 높은 열전도율
-양호한 열충격 저항성
-화학 물질과 산화에 대한 저항성
1. 절삭 도구 및 가공: 실리콘 나이트라이드 막대는 경질 재료 가공을 위한 절삭 도구 제작에 사용됩니다. 높은 경도, 인성 및 열 안정성으로 인해 효율적인 절삭 및 장시간 도구 수명을 보장합니다.
2. 베어링 및 롤러: 고속 및 고정밀 응용 분야의 베어링에서 롤러로 사용됩니다. 마모 저항성, 낮은 열팽창률 및 극한 조건에서 작동 가능한 특성으로 인해 고성능 베어링에 적합합니다.
3. 항공우주 부품: 높은 강도-중량 비율, 열 안정성 및 마모 및 부식 저항이 요구되는 항공우주 응용 분야의 부품으로 사용됩니다.
4. 자동차 산업: 엔진 부품, 터보차저 로터 및 연료 분사기와 같은 고성능 자동차 부품에 사용됩니다. 실리콘 나이트라이드 막대는 무게 감소, 효율성 향상, 내구성 향상에 기여합니다.
5. 반도체 제조: 높은 순도, 마모 및 부식 저항, 고온 저항이 요구되는 반도체 가공 장비에 적용됩니다. 실리콘 나이트라이드 막대는 웨이퍼 취급, 에칭 및 기타 공정에서 사용됩니다.
6. 의료 기기: 생체 적합성, 높은 강도 및 마모 및 부식 저항으로 인해 의료 기기와 임플란트에 사용됩니다. 멸균 및 장기 신뢰성이 요구되는 응용 분야에 적합합니다.
7. 열전대 보호: 고온 및 부식 환경에서 열전대를 위한 보호 외피로 사용됩니다. 열 안정성과 화학 저항성은 정확한 온도 측정과 긴 서비스 수명을 보장합니다.
8. 화학 처리: 부식성 화학 물질에 대한 저항성과 기계적 강도가 중요한 펌프, 밸브 및 반응기와 같은 화학 처리 장비에 사용됩니다.
9. 에너지 분야: 발전 및 에너지 응용, 가스 터빈 및 기타 고온 장비에 사용됩니다. 실리콘 나이트라이드 막대는 가혹한 작동 조건에서 내구성과 성능을 제공합니다.
10. 스포츠 용품: 강도, 낮은 밀도 및 마모 저항성으로 인해 경량 자전거 프레임 및 구성 요소와 같은 고성능 스포츠 용품에 사용됩니다.
11. 광학 장치: 안정성, 낮은 열팽창률 및 내구성이 중요한 고정밀 광학 기기에서 적용됩니다.
SAM의 실리콘 나이트라이드 막대는 저장 및 운송 중 손상을 최소화하고 제품의 품질을 원래 상태로 유지하기 위해 신중하게 취급됩니다.
항목 |
단위 |
전형적인 값 |
밀도 |
g/cm3 |
3.22 |
물리적 특성 |
||
경도 |
- |
HRA90 |
비커스 경도 (Hv50) |
HV0.5 |
>1550 |
탄성 계수 |
Gpa |
290 |
굽힘 강도 |
MPa |
>600 |
압축 강도 |
MPa |
2500 |
파괴 인성, KIc |
MPa•m1/2 |
>6.0 |
열역학적 특성 |
||
최대 사용 온도 |
ºC |
1200 |
열전도율 |
W/m•k |
15-20 |
열팽창 계수 |
10-6/ ºC |
>3.1 |
열冲격 저항 |
ΔT ºC |
500 |
비열 |
KJ/kg.k |
700 |
전기적 특성 |
||
20 ºC에서의 부피 저항률 |
Ω•cm |
1.0x1012 |
Product Name: Silicon Nitride Rod
CAS #: 12033-89-5
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS07
STOT SE 3 H335 May cause respiratory irritation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Xi; Irritant
R37: Irritating to respiratory system.
Information concerning particular hazards for human and environment:
N/A
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No 1272/2008
The substance is classified and labeled according to the CLP regulation.
Hazard pictograms
GHS07Signal word
Warning
Hazard statements
H335 May cause respiratory irritation.
Precautionary statements
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 Call a POISON CENTER/doctor/.../if you feel unwell.
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
WHMIS classification
Not controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY
1
0
1
Health (acute effects) = 1
Flammability = 0
Physical Hazard = 1
Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Substances
CAS No. / Substance Name:
12033-89-5 Silicon(IV) nitride
Identification number(s):
EC number: 234-796-8
Description of first aid measures
If inhaled:
Supply patient with fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
If swallowed:Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Product is not flammable. Use fire-fighting measures that suit the surrounding fire.
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Silicon oxide
Nitrogen oxides (NOx)
Advice for firefighters
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Ensure adequate ventilation.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
The product is not flammable
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and
having an average face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values
that should be monitored at the workplace.
Additional information: No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Maintain an ergonomically appropriate working environment.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Recommended filter device for short term use:
Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls.
Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only
use equipment tested and approved under appropriate government standards.
Protection of hands: Impervious gloves
Inspect gloves prior to use.
Suitability of gloves should be determined both by material and quality, the latter of which may vary by
manufacturer.
Penetration time of glove material (in minutes): No data available
Eye protection: Safety glasses
Body protection: Protective work clothing.
Information on basic physical and chemical properties
Appearance:
Form: Solid in various forms
Color: Pale grey
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: 1900 °C (3452 °F) (subl)
Boiling point/Boiling range: No data availableSublimation temperature / start: No data available
Flammability (solid, gas): No data available.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 3.2 g/cm
3
(26.704 lbs/gal)
Relative density: No data available.
Vapor density: N/A
Evaporation rate: N/A
Solubility in Water (H
2
O): No data available
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidizing agents
Conditions to avoid
No data available
Incompatible materials:
Oxidizing agents
Hazardous decomposition products:
Silicon oxide
Nitrogen oxides
Information on toxicological effects
Acute toxicity: No effects known.
LD/LC50 values that are relevant for classification: No data
Skin irritation or corrosion: May cause irritation
Eye irritation or corrosion: May cause irritation
Sensitization: No sensitizing effects known.
Germ cell mutagenicity: No effects known.
Carcinogenicity: No classification data on carcinogenic properties of this material is available from the
EPA, IARC, NTP, OSHA or ACGIH.Reproductive toxicity: No effects known.
Specific target organ system toxicity - repeated exposure: No effects known.
Specific target organ system toxicity - single exposure: May cause respiratory irritation.
Aspiration hazard: No effects known.
Subacute to chronic toxicity: No effects known.
Additional toxicological information: To the best of our knowledge the acute and chronic to
xicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow material to be released to the environment without official permits.
Do not allow undiluted product or large quantities to reach groundwater, water courses, or sewage
systems.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Other adverse effects
No data available
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, ADN, IMDG, IATA
N/A
UN proper shipping name
DOT, ADN, IMDG, IATA
N/A
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
ClassN/A
Packing group
DOT, IMDG, IATA
N/A
Environmental hazards:
N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
Safety, health and environmental regulations/legislation specific for the substance or mixture National
regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH - Pre-registered substances
Substance is listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information isbelieved to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.