{{flagHref}}
| 카탈로그 번호. | TS4599 |
| CAS 번호 | 12045-63-5 |
| 구성 | TiB2 |
| APS | 1.0-3.0um 또는 사용자 지정 |
| 모양 | 회색 분말 |
열처리를 위한 구형 티타늄 디보라이드 (TiB2)는 우수한 열 안정성, 산화 저항 및 전기 전도성을 갖춘 회색-검정색 육각 결정 또는 분말입니다. Stanford Advanced Materials (SAM)는 열처리를 위한 고품질 구형 티타늄 디보라이드 (TiB2) 제조 및 공급에 대한 풍부한 경험을 보유하고 있습니다.
열 처리용 구형 티타늄 다보라이드(TiB2)는 뛰어난 열 안정성, 산화 저항성 및 전기 전도성을 가진 회색-검은색 육방정계 결정 또는 분말입니다.
|
사양 |
|
|
평균 입자 크기 |
1.0-3.0um |
|
순도 (%) |
>99.5 |
|
산소 함량 (%) |
≤0.8 |
|
질소 함량 (%) |
≤0.10 |
|
탄소 함량 (%) |
≤0.1 |
|
붕소 함량 (%) |
29.5-30.9 |
열 처리용 구형 티타늄 다보라이드(TiB2)는 전기 전도성이 우수한 요구 조건을 가진 고온 주입 세라믹 제품, 산업 알루미늄 전해 조셀의 음극 코팅 재료, 고온 압착 티타늄 다보라이드 + 붕소 카바이드 복합 방탄 세라믹 삽입물에 사용됩니다.

GHS07
경고
H302 + H312 + H332
P261 - P264 - P280 - P301 + P312 - P302 + P352 + P312 - P304 + P340 + P312
급성 독성 4 경구
11 - 가연성 고체
WGK 3
해당 없음
해당 없음
N95형 먼지 마스크(미국), 안경, 장갑
우리의 열 처리용 구형 티타늄 다보라이드(TiB2)는 제품 품질을 유지하기 위해 저장 및 운송 중에 세심하게 취급됩니다.
1. 구형 티타늄 다보라이드(TiB2) 분말의 주요 용도는 무엇인가요? 구형 티타늄 다보라이드(TiB2) 분말은 주로 다음과 같은 용도로 사용됩니다:
마모 저항성이 뛰어나고 고온 보호 코팅을 생성하기 위한 열 처리. 고온 환경에 노출되는 항공 우주 및 방위 애플리케이션, 열 보호 시스템 및 고성능 구성 요소.
극한의 열과 기계적 응력을 견뎌야 하는 부품의 고온 구조 재료.
고마모 환경에서 부품의 내구성을 향상시키기 위한 공구 및 산업 기계.
열 전도성과 전기 전도성을 모두 요구하는 전자 및 전기 응용 분야.
2. 구형 티타늄 다보라이드(TiB2) 분말의 주요 특성은 무엇인가요?
구형 티타늄 다보라이드(TiB2) 분말의 주요 특성은 다음과 같습니다:
높은 융점(~3,250°C), 극한 조건에서 우수한 열 안정성 보장. 뛰어난 경도로 탁월한 마모 및 마모 저항 제공.
우수한 전기 전도성으로 전자 및 열 분산 응용 분야에 적합.
탁월한 산화 저항으로 고온 산화 환경에서의 내구성 보장.
효율적인 열 전달 및 관리를 위한 열 전도성.
3. 구형 티타늄 다보라이드(TiB2) 분말을 사용하는 산업은 어디인가요?
구형 티타늄 다보라이드(TiB2) 분말은 다음과 같은 산업에서 널리 사용됩니다:
항공 우주 및 방위(열 보호 시스템, 재진입 차량 구성 요소 및 고성능 항공 재료).
에너지 및 전력 생성(반응기 및 터빈의 고온 코팅 및 구성 요소).
자동차 및 산업 제조(혹한 환경에서의 마모 저항 코팅, 공구 및 기계).
전자 및 전기(열 관리 솔루션, 전기 접촉 및 고전도성 구성 요소).
고급 제조(분말 야금 응용 및 고성능 재료 제작).
|
사양 |
|
|
평균 입자 크기 |
1.0-3.0um |
|
순도 (%) |
>99.5 |
|
산소 함량 (%) |
≤0.8 |
|
질소 함량 (%) |
≤0.10 |
|
탄소 함량 (%) |
≤0.1 |
|
붕소 함량 (%) |
29.5-30.9 |
*위 제품 정보는 이론적인 데이터를 기반으로 하며 참고용입니다. 실제 사양은 다를 수 있습니다.
Product Name: Titanium Diboride
CAS #: 12045-63-5
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The substance is not classified as hazardous to health or the environment according to the CLP
regulation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
N/A
Information concerning particular hazards for human and environment:
No data available
Hazards not otherwise classified
No data available
Label elements
Labelling according to Regulation (EC) No 1272/2008
N/A
Hazard pictograms
N/A
Signal word
N/A
Hazard statements
N/A
WHMIS classificationNot controlled
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY
1
0
1
Health (acute effects) = 1
Flammability = 0
Physical Hazard = 1
Other hazards
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Substances
CAS No. / Substance Name:
12045-63-5 Titanium boride
Identification number(s):
EC number:
234-961-4
Description of first aid measures
If inhaled:
Supply patient with fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
If swallowed:
Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Product is not flammable. Use fire-fighting measures that suit the surrounding fire.
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Metal oxide fume
Boron oxide
Advice for firefighters
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Pick up mechanically.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Information about protection against explosions and fires:
The product is not flammable
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from oxidizing agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average
face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
None.
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Maintain an ergonomically appropriate working environment.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands:
Impervious gloves
Inspect gloves prior to use.
Suitability of gloves should be determined both by material and quality, the latter of which may vary by
manufacturer.
Penetration time of glove material (in minutes)
No data available
Eye protection:
Safety glasses
Body protection:
Protective work clothing
Information on basic physical and chemical properties
Appearance:
Form: Powder or solid in various forms
Color: Grey
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: 3225 °C (5837 °F)
Boiling point/Boiling range: No data available
Sublimation temperature / start: No data available
Flammability (solid, gas)
No data available.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data availableUpper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 4.38 g/cm
3
(36.551 lbs/gal)
Relative density
No data available.
Vapor density
N/A
Evaporation rate
N/A
Solubility in Water (H
2
O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
Reacts with strong oxidizing agents
Conditions to avoid
No data available
Incompatible materials:
Oxidizing agents
Hazardous decomposition products:
Metal oxide fume
Boron oxide
Information on toxicological effects
Acute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for
components in this product.
LD/LC50 values that are relevant for classification:
No data
Skin irritation or corrosion:
May cause irritation
Eye irritation or corrosion:
May cause irritation
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
No effects known.Carcinogenicity:
EPA-I: Data are inadequate for an assessment of human carcinogenic potential.
Reproductive toxicity:
No effects known.
Specific target organ system toxicity - repeated exposure:
No effects known.
Specific target organ system toxicity - single exposure:
No effects known.
Aspiration hazard:
No effects known.
Subacute to chronic toxicity:
No effects known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow material to be released to the environment without official permits.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT:
N/A
vPvB:
N/A
Other adverse effects
No data available
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, ADN, IMDG, IATAN/A
UN proper shipping name
DOT, ADN, IMDG, IATA
N/A
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
Class
N/A
Packing group
DOT, IMDG, IATA
N/A
Environmental hazards: N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information: DOT
Marine Pollutant (DOT): No
Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH - Pre-registered substances
Substance is listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.