{{flagHref}}
구형 비스무트 분말은 다양한 입자 크기로 제공되며, 다크 그레이에서 블랙 색상을 가지고 있습니다. 구형 비스무트 분말은 주철, 강철 및 알루미늄 합금의 첨가제로 사용되어 합금 절삭 성능을 향상시킵니다.
순도 |
99.9% |
제조 방법: |
수조 원자화 및 가스 원자화 |
체적 밀도 |
0.3g/cm3 (50nm) 1.1g/cm3 (1-3um) |
밀도 |
9.8 g/cm3 |
입자 크기 |
50nm, 1-3um |
융점 |
271℃ |
비등점 |
1560℃ |
저융점 합금:
안전 장치, 퓨즈 및 화재 감지 시스템에서 필요한 제어된 용융을 위해 사용됩니다.
적층 제조(3D 프린팅):
전문 저온 또는 의료 구성 요소에 적용됩니다.
전자 및 반도체:
친환경 전자 조립을 위해 납 대체제로 작용합니다.
의료 영상 및 방사선 차폐:
조영제 및 X선 및 감마선 차폐를 위한 비독성, 밀도가 높은 재료로 사용됩니다.
저희 구형 비스무트 분말은 제품의 품질을 보존하기 위해 보관 및 운반 과정에서 신중하게 취급됩니다.
Q1: 구형 비스무트 분말이란 무엇인가요?
A: 구형 비스무트 분말은 균일한 구형 형태를 가진 고순도 비스무트로 구성된 미세 금속 분말입니다. 구형 형태는 유동성을 개선하여 저온 합금, 적층 제조 및 의료 영상과 같은 응용에 적합합니다.
Q2: 어떻게 생산되나요?
A: 일반적으로 가스 원자화 또는 원심 원자화를 통해 제조되며, 구형 입자를 보장하고 일관된 크기 분포와 최소 산화를 얻습니다.
Q3: 이 분말은 위험한가요?
A: 비스무트는 비독성 및 환경 친화적인 물질로 여겨집니다. 그러나 미세 분말은 흡입 및 피부 접촉을 방지하기 위해 적절한 개인 보호 장비(PPE, 장갑, 마스크)를 사용해야 합니다.
순도 |
99.9% |
생산 방법: |
수조 분말화 및 가스 분말화 |
벌크 밀도 |
0.3g/cm3 (50nm) 1.1g/cm3 (1-3um) |
밀도 |
9.8 g/cm3 |
입자 크기 |
50nm, 1-3um |
융점 |
271℃ |
비점 |
1560℃ |
Product Name: Bismuth Powder
CAS #: 7440-69-9
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture in accordance with 29 CFR 1910 (OSHA HCS)
GHS02 Flame
Flam. Sol. 2 H228 Flammable solid.
Hazards not otherwise classified
No data available.
GHS label elements
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Hazard pictograms
GHS02
Signal word
Warning
Hazard statements
H228 Flammable solid.
Precautionary statements
P210
Keep away from heat/sparks/open flames/hot surfaces. No smoking.P280
Wear protective gloves/protective clothing/eye protection/face protection.
P240
Ground/bond container and receiving equipment.
P241
Use explosion-proof electrical/ventilating/lighting/equipment.
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
WHMIS classification
B4 - Flammable solid
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
Health (acute effects) = 1
Flammability = 2
Physical Hazard = 1
Other hazards
Results of PBT and vPvB assessment:
PBT:
N/A.
vPvB:
N/A.
Substances
CAS No. / Substance Name:
7440-69-9 Bismuth
Identification number(s):
EC number:
231-177-4
Description of first aid measures
If inhaled:
Supply fresh air. If not breathing, provide artificial respiration. Keep patient warm.
Seek immediate medical advice.
In case of skin contact:
Immediately wash with soap and water; rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Consult a physician.
If swallowed:
Seek medical treatment.
Information for doctor
Most important symptoms and effects, both acute and delayed
No information available.
Indication of any immediate medical attention and special treatment needed
No information available.
Extinguishing media
Suitable extinguishing media
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing media
Water
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Metal oxide fume
Advice for firefighters
Protective equipment:
Wear self-contained respirator.
Wear fully protective impervious suit.
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Methods and material for containment and cleanup:
Keep away from ignition sources.
Ensure adequate ventilation.
Prevention of secondary hazards:
Keep away from ignition sources.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure adequate ventilation.
Information about protection against explosions and fires:
Protect against electrostatic charges.
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles:
Store in a cool location.
Information about storage in one common storage facility:
Do not store together with acids.
Store away from oxidizing agents.
Store away from halogens.Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No information available.
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average
face velocity of at least 100 feet per minute.
Control parameters
Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that should be
monitored at the workplace.
Additional information:
No data
Exposure controls
Personal protective equipment
Follow typical general protective and industrial hygiene measures for handling chemicals.
Keep away from foodstuffs, beverages and feed.
Remove all soiled and contaminated clothing immediately.
Wash hands before breaks and at the end of work.
Breathing equipment:
Use suitable respirator when high concentrations are present.
Protection of hands:
Impervious gloves
Inspect gloves prior to use.
Suitability of gloves should be determined both by material and quality, the latter of which may vary by
manufacturer.
Penetration time of glove material (in minutes)
No data available.
Eye protection:
Safety glasses
Body protection:
Protective work clothing.
Information on basic physical and chemical properties
Appearance:
Form: Powder
Color: gray
Odor: Odorless
Odor threshold: No data available.
pH: N/A.
Melting point/range: 271.4 °C (521 °F)
Boiling point/range: 1564 °C (2847 °F)
Sublimation temperature / start: No data available.
Flash point: N/A
Flammability (solid, gas):Highly flammable.
Ignition temperature: No data available.
Decomposition temperature: No data available.
Auto igniting: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available.
Upper: No data available.
Vapor pressure at 840 °C (1544 °F): 1 hPa (1 mm Hg)
Density at 20 °C (68 °F): 9.79 g/cm³ (81.698 lbs/gal)
Bulk density at 20 °C (68 °F): 6000 kg/m³
Relative density
No data available.
Vapor density
N/A.
Evaporation rate
N/A.
Solubility in Water (H
2
O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A.
Kinematic: N/A.
Other information
No information available.
Reactivity
No data available.
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
No dangerous reactions known
Conditions to avoid
No information available.
Incompatible materials:
Acids
Halogens
Oxidizing agents
Hazardous decomposition products:
Metal oxide fume
Information on toxicological effects
Acute toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for
components in this product.
LD/LC50 values that are relevant for classification:Oral LD50 5000 mg/kg (rat)
Skin irritation or corrosion:
May cause irritation
Eye irritation or corrosion:
May cause irritation
Sensitization:
No sensitizing effects known.
Germ cell mutagenicity:
N/A
Carcinogenicity:
No classification data on carcinogenic properties of this material is available from the EPA, IARC,
NTP, OSHA or ACGIH.
Reproductive toxicity:
N/A
Specific target organ system toxicity - repeated exposure:
N/A
Specific target organ system toxicity - single exposure:
N/A
Aspiration hazard:
N/A
Subacute to chronic toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains multiple dose toxicity data for
this substance.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No information available.
Persistence and degradability:
No information available.
Bioaccumulative potential:
No information available.
Mobility in soil:
No information available.
Additional ecological information:
General notes:
Do not allow material to be released to the environment without official permits.
Avoid transfer into the environment.
Results of PBT and vPvB assessment:
PBT:
N/A.
vPvB:
N/A.
Other adverse effects
No information available.
Recommendation:
Consult state, local or national regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, IMDG, IATA
UN3089
UN proper shipping name
DOT
Metal powders, flammable, n.o.s. (Bismuth powder)
IMDG, IATA
METAL POWDER, FLAMMABLE, N.O.S. (Bismuth powder)
Transport hazard class(es)
DOT
Class
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Label
4.1
Class
4.1 (F3) Flammable solids, self-reactive substances and solid desensitised explosives
Label
4.1
IMDG, IATA
Class
4.1 Flammable solids, self-reactive substances and solid desensitised explosives.
Label
4.1
Packing group
DOT, IMDG, IATA
III
Environmental hazards:
N/A.
Special precautions for user
Warning: Flammable solids, self-reactive substances and solid desensitised explosives
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A.
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
UN "Model Regulation":
UN3089, Metal powders, flammable, n.o.s. (Bismuth powder), 4.1, III
Safety, health and environmental regulations/legislation specific for the substance or mixtureGHS label elements
The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS)
Hazard pictograms
GHS02
Signal word
Warning
Hazard statements
H228 Flammable solid.
Precautionary statements
P210
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P280
Wear protective gloves/protective clothing/eye protection/face protection.
P240
Ground/bond container and receiving equipment.
P241
Use explosion-proof electrical/ventilating/lighting/equipment.
P370+P378 In case of fire: Use for extinction: CO2, powder or water spray.
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)
Substance is not listed.
California Proposition 65
Prop 65 - Chemicals known to cause cancer
Substance is not listed.
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
1907/2006 (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.