{{flagHref}}
| 카탈로그 번호. | YM4655 |
| 화학 공식 | YB6 |
| CAS 번호 | 12008-32-1 |
| 모양 | 짙은 회색 분말 |
| 입자 크기 | 20~500메시(D50) |
| 밀도 | 4.32g/cm3 |
| 분자량 | 153.8g/mol |
| 순도 | >99.9% |
이트륨 보라이드 (YB6) 분말은 일반 화학식 YB6를 가진 무기 금속 화합물입니다. 스탠포드 어드밴스드 머티리얼즈 (SAM)은 고품질 이트륨 보라이드 (YB6) 분말을 제조 및 공급하는 경험이 풍부합니다.
관련 제품: 이트륨 산화물, 이트리아 (Y2O3), 코발트 보라이드 (Co2B) 분말, 망간 다보라이드 (MnB2) 분말, 니켈 보라이드 (NiB) 분말
이트륨 붕소(YB6) 분말은 이트륨과 붕소로 구성된 결정질 물질입니다. YB6는 가장 일반적인 형태입니다. YB6는 높은 화학적 및 열적 안정성, 높은 온도에서 낮은 증발률, 높은 전기 전도성 및 높은 중성자 흡수율을 가진 내화 세라믹 물질입니다. 이는 초고온 또는 핵 환경과 같은 극한 환경에 적합합니다.
|
입자 크기(D50) |
325mesh |
|
순도 |
>99.9% |
|
산소 성분 |
<0.5% |
|
질소 성분 |
<0.05% |
|
탄소 성분 |
<0.05% |
|
붕소 성분 |
32.7~42.2% |
이트륨 붕소(YB6) 분말은 금속 부품을 마모로부터 보호하고 수명을 연장하는 표면층을 형성할 수 있는 코팅 재료로 널리 사용됩니다. YB6는 절삭 도구의 경도 및 마모 저항성을 증가시키기 위해 도구에 추가될 수 있습니다. YB6는 용접 전극, 반도체 제조 및 일부 고압 물리학 연구에도 사용됩니다.
저희 이트륨 붕소(YB6) 분말은 제품의 품질을 원래 상태로 보존하기 위해 저장 및 운송 중 신중하게 취급됩니다.
1. 이트륨 붕소(YB₆) 분말이란 무엇인가요?
이트륨 붕소(YB₆) 분말은 이트륨과 붕소로 구성된 세라믹 화합물입니다. 이 물질은 회색 또는 검은색의 분말 형태로 나타나며, 높은 융점, 경도, 뛰어난 열 및 전기 전도성을 가지고 있습니다. 다양한 고성능 응용에 사용됩니다.
2. 이트륨 붕소(YB₆) 분말의 주요 특성은 무엇인가요?
높은 융점
뛰어난 경도로 마모 저항 응용에 적합
높은 열 전도성
양호한 전기 전도성
고온 환경에서의 화학적 안정성
높은 중성자 흡수 능력으로 인해 핵 응용에 유용
3. 이트륨 붕소(YB₆) 분말의 주요 응용은 무엇인가요?
항공 우주 및 방위 응용을 위한 고성능 세라믹
제조 산업의 마모 저항성 코팅
핵 반응기의 중성자 흡수재
전기 접점 및 부품
극한 환경에서의 열 차폐막
여러 고급 기술 응용에서 사용되는 자성 물질
|
입자 크기 (D50) |
325mesh |
|
순도 |
>99.9% |
|
산소 성분 |
<0.5% |
|
질소 성분 |
<0.05% |
|
탄소 성분 |
<0.05% |
|
붕소 성분 |
32.7~42.2% |
*위 제품 정보는 이론적인 데이터를 기반으로 하며 참고용입니다. 실제 사양은 다를 수 있습니다.
Product Name: Yttrium Boride
CAS #: 12008-32-1
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
Classification of the substance or mixture
Not a hazardous substance or mixture.
GHS Label elements, including precautionary statements
Not a hazardous substance or mixture.
Hazards not otherwise classified (HNOC) or not covered by GHS-none
Substances
Synonyms: Yttrium boride
Molecular weight: 153.77 g/mol
CAS-No.: 12008-32-1
EC-No.: 234-538-4
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2) and/or
in section 11
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Borane/boron oxides, Yttrium oxides
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing Vapors, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.
Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature-20 °C
Keep in a dry place.
Specific end use(s)Apart from the uses mentioned in section 1 no other specific uses are stipulated.
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards such
as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use
type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved
under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
Appearance
Form: powder
Odor
No data available
Odor Threshold
No data available
pH
No data available
Melting point/freezing point
No data available
Initial boiling point and boiling range
No data available
Flash point
No data available
Evaporation rate
No data available
Flammability (solid, gas)
No data available
Upper/lower flammability or explosive limits
No data available
Vapor pressure
No data availableVapor density
No data available
Relative density
No data available
Water solubility
No data available
Partition coefficient: n-octanol/water
No data available
Auto-ignition temperature
No data available
Decomposition temperature
No data available
Viscosity
No data available
Explosive properties
No data available
Oxidizing properties
No data available
Other safety information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products-No data available
In the event of fire: see section 5
Information on toxicological effects
Acute toxicity
No data available
Inhalation: No data available
Dermal: No data available
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data availableGerm cell mutagenicity
No data available
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
ACGIH:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by ACGIH.
NTP:
No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity -single exposure
No data available
Specific target organ toxicity -repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
No data available
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods
SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
This material does not contain any chemical components with known CAS numbers that exceed the
threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
Yttrium hexaboride
CAS-No.
12008-32-1
New Jersey Right To Know Components
Yttrium hexaboride
CAS-No.
12008-32-1
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth
defects, or any other reproductive harm.
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
오늘 바로 문의해 주시면 자세한 정보를 확인하시고 최신 가격 정보를 받으실 수 있습니다. 감사합니다!
RFQ 정보를 입력하시면 영업 엔지니어가 24시간 이내에 연락을 드립니다. 문의 사항이 있으시면 949-407-8904(PST 오전 8시~오후 5시)로 전화해 주세요.
저작권 © 1994-2025 Stanford Advanced Materials 소유, Oceania International LLC, 판권 소유.